The light emitted by the light source or lamp will not cover the entire space, because they all have a certain angle of light, that is, the range that the light of the light source or lamp can reach is limited. If three light bulbs with the same power but different beam angles are used to illuminate the same portrait, different effects will be shown.

First of all, what is the beam angle?
In layman's terms, the beam angle refers to the angle at which the light source or the lamp emits the beam, that is, the angle formed by the boundary of a certain intensity range of the beam (see Figure 1). There are generally two ways to define this angle, that is, the angle formed by 50% or 10% of the central light intensity.
Secondly, what is the relationship between beam angle and light spot?
The most intuitive manifestation of the beam angle on the illuminated surface is the spot and illuminance. If the same light source is used in reflectors with different angles, the larger the beam angle, the smaller the central light intensity; the larger the spot, the smaller the illuminance; on the contrary, the smaller the beam angle, the greater the central luminous intensity; the smaller the spot, the lower the illuminance Bigger.
Furthermore, in practical applications, different beam angles have different applications.
If you want to focus on the illuminated object, and the lamp is far away from the illuminated object, you can choose a light with a smaller beam angle. But if it is an ordinary home lighting, you can choose a large-angle light source or lamps to achieve a better lighting effect. Especially for replacing the light source, the recommendations are as follows:
1. Illuminated by naked lights. In this application scenario, if the light angle is too small, the ceiling cannot be illuminated, which is likely to produce a sense of space depression; a larger angle can make the space brighter and more comfortable.
2. The lamps are illuminated. Earlier, the original lamps were all optically designed in accordance with the light distribution of incandescent lamps, so that their luminous effects could reach the best. When replacing the light source, if you use an LED lamp with a light output angle that is significantly different from that of an incandescent lamp, the light output effect of the lamp will be greatly reduced. Generally, the light output angle of an incandescent lamp is 330 degrees, but it is difficult for the light output angle of most light sources on the market to reach 200 degrees.
Therefore, as a manufacturing enterprise, it is necessary to strictly demand itself with high standards, devote all its efforts to every process and every component, to ensure the quality of each bulb, and to allow consumers to really use good light.






