UV-LED point light source
GMKJ UV LED point light source products are widely used in electronic glue, mobile phone UV glue curing, automotive panels, home appliance panels, circuit boards, optical communications and other industries.
UV point light source curing effect: 1. UV glue has good transparency, and the product looks exquisite after curing. 2. UV glue curing is easy to clean the appearance and has a certain anti-fouling cleaning function. 3. UV glue curing has good adhesion to avoid glue falling off. 4. UV glue curing is environmentally friendly, does not contain mercury, does not produce ozone, and has no pollution. Meet the national environmental protection requirements. It is a safer and more environmentally friendly alternative to traditional ultraviolet light sources. 5. The life of traditional mercury lamp is about 1000 hours, and UV LED ultraviolet lamp can reach 20000-30000 hours, avoiding repeated purchases by enterprises and saving enterprise costs. 6. UV glue curing products are stable, the system operation is simple, and the operation efficiency is high.
UV LED coating
GMKJ UV LED curing coating products are used in coatings and home improvement industries. Compared with traditional UV curing technology, LED-UV coating curing technology has great advantages such as low energy consumption, more environmental protection, long life, high efficiency, large irradiation range, and small installation size. UV LED is a cold light source, which can effectively prevent the substrate from shrinking, deforming and blistering due to overheating, and has a wide adaptability to materials. The core components of UV LED are individually customized and modularized to ensure long-term stable operation of the product. UV LED light curing paint film has a fast curing speed, high efficiency, time saving and energy saving. The lamp is only turned on when ultraviolet light is needed, which greatly extends the life of the lamp holder. In addition, the UV LED light source has no mercury, no lampshades and other accessories, effectively reducing equipment maintenance costs.
UV-LED curing box
GMKJ UV-LED curing box products adopt modular arrangement, mainly used for the bonding of mobile phone components, plastic components and other industries; electronic components, liquid crystal film, electronic glue sealing glue water curing; light source usually chooses 360NM, 385NM, 395NM, 400NM , 420NM, etc. Various wavelengths can be freely combined, and the luminous angle, luminous distance, and luminous range can be customized according to customers. The UV LED curing system is easy to operate and light up when it is turned on, which saves standby power consumption and improves production efficiency. The light is stable and uniform, and the uniform lighting effect is good. More than 30,000 hours, 30 times that of traditional lamps. The equipment is used for life, which greatly saves costs for the enterprise. Moreover, the UV LED light source has no mercury, no lampshades and other accessories, which effectively reduces equipment maintenance costs and fully complies with the national environmental protection policy.
UV-LED surface light source
The high-performance UV LED surface light source independently developed and produced by GMKJ LED can be equipped with a controller and a heat sink. The UV spectrum wavelength can be customized according to customer needs. There are two heat dissipation methods, air cooling and water cooling, and the effective curing area can also be customized according to requirements. It can be used independently or in conjunction with the production line, supporting external signal input and triggering.
Product description of UV-LED curing oven:
1. UV LED curing oven has uniform and stable light and strong light, which shortens the curing time of the product and improves production efficiency.
2. UV LED has low heat radiation, especially suitable for liquid crystal edge banding, plastic substrate, film printing, medical equipment, optical lens and other occasions where temperature is required.
3. UV LED has low energy consumption, energy saving and electricity saving, strong light power, no need to preheat, and it can be used immediately.
4. UV LED is safe and environmentally friendly, does not contain mercury, does not produce ozone, and is convenient and simple to maintain.
5. UV LED can customize various specifications of uv led curing furnace according to customers' current application.
UV-LED curing box
GMKJ UV LED curing box products adopt modular arrangement, mainly used for the bonding of mobile phone components, plastic components and other industries; electronic components, liquid crystal films, electronic glue sealing glue water curing; light source usually chooses UV LED360NM, UV LED385NM, UV LED395NM , UV LED400NM, UV LED420NM, etc. Various wavelengths can be freely combined, and the luminous angle, luminous distance, and luminous range can be customized according to customers. The UV LED curing system is easy to operate and light up when it is turned on, saving standby power consumption and improving efficiency.
