Guangmai Technology is proffesional in making the SMD 5050 RGB LED Chip for Strip Light.
5050 SMD lamp beads introduction:
Alias: 5050 lamp beads, 5050led lamp beads
Current: 20MA
Voltage: 3.0V-3.4V
Power: 0.2W
Color temperature: white light 1700K-25000K RGB (620NM-625NM, 520NM-525NM, 460NM-465NM)
CRI: 80-100
Beam angle: 120°
Bracket package: PPA brass, black-faced high cup, transparent colloid
Lamp beads welding wire: pure gold wire
Chip packaging: Cree, Sanan, Epistar, Toyota, Dingyuan
Lamp bead size: 5.0mm*5.0mm*1.7mm
Warranty: 5 years
Service life: 8-10 years
Packing method: anti-static bag coil
Delivery time: 1 day for samples, 3-7 days for large quantities
Different color to choose:
Product Specification
Typical Electrical & Optical Characteristics ( Ta = 25°C)
Package Dimension
Application
LED guardrail tube, line light bar, hard light bar, flexible light bar, module, outdoor lighting, suitable for hotel lobby, room lighting, home lighting, restaurant lighting, car lighting, KTV lighting, etc.
About Guangmai LED
Precautions before using the SMD LEDs:
1. LED vulcanization is a process in which sulfur in the environment enters the stent and chemically reacts with +1 valence silver to produce black AG2S. This process will result in a decrease in the reflective ability of the silver-plated layer of the stent, and serious color temperature drift and brightness, which greatly affects the performance of the product. therefore. When using, take care to take corresponding anti-sulfur measures, such as avoiding the use of highly volatile sulfur-containing substances, and avoiding contact with high-sulfur substances.
2. Static electricity and power surge can cause changes in product characteristics, such as a decrease in forward voltage, etc. If the situation is serious, it can even damage the product. Therefore, effective anti-static measures must be taken during use.
All related equipment and machinery should be properly grounded, and other measures must be taken to prevent static electricity and surges. The use of anti-static wristbands, anti-static mats, anti-static work clothes, work shoes, gloves, and anti-static containers are all effective measures to prevent static electricity and surges.
3. It is recommended that the SMT reflow soldering temperature should not exceed 260 degrees.
The temperature of the soldering iron should not exceed 350℃ for 5 seconds. Working temperature: -25℃~80℃
Storage temperature -40℃~100℃
4. Clamp it from the side of the material by using appropriate tools. Do not use your hands or sharp metal to press the surface of the colloid directly, and do not stack the module materials together, as this may damage the internal circuit.
5 After opening, the product must be stored in an environment where the temperature is not higher than 30℃ and the humidity is not higher than 10%RH, and it should be used up within 8 hours.
Datasheet:
SMD 5050 RGB LED Chip for Strip Light datasheet can be download from this page.
Hot Tags: smd 5050 rgb led chip for strip light, China, manufacturers, suppliers, factory, price, cheap, quotation, datasheet, specs, specification
