High power SMD LED chip ESD protection
High-power LED lamp beads are semiconductor devices, which are more sensitive to static electricity. Especially for white, green, blue, and purple LED lamp beads, it is necessary to prevent and eliminate static electricity.
1. The occurrence of static electricity:

(1) Conflict: In daily life, any two objects of different materials touch and then separate, and static electricity can be generated, and the common way to generate static electricity is to generate electricity by conflict. The better the insulation of the material, the easier it is to generate electricity. In addition, any two objects of different materials can also generate static electricity after being separated after touching them.
(2) Induction: For conductive materials, since electrons can move freely on its surface, if it is placed in an electric field, positive and negative ions will be transported due to the repulsion of the same sex and the attraction of the opposite sex, and the generate charge.
(3) Conduction: For conductive materials, because electrons can move freely on its surface, such as touching a charged object, charge transfer will occur.
2. The damage of static electricity to high-power LED lamp beads:
(1) Due to the heat generated by the instantaneous electric field or current, the high-power LED lamp bead is partially injured, and the leakage current is rapidly increased, which can still work, but the brightness is reduced and the lifespan is damaged.
(2) The insulating layer of the high-power LED lamp bead is damaged by the electric field or current, so that the equipment cannot be operated (damaged), and it appears as a dead lamp.

3. Static electricity protection and elimination methods: For the entire process (production, testing, packaging, etc.), all employees who directly touch the high-power LED lamp beads must do a good job of avoiding and eliminating static electricity.
(1) Anti-static floors are laid in the workshop and grounded.
(2) The workbench is an anti-static workbench, and the production machine is well grounded.
(3) Operators wear anti-static clothing, anti-static wristbands, gloves or foot rings.
(4) Use an ion fan.
(5) Do a good job of grounding the soldering iron.
(6) Use anti-static materials for packaging.






