There are many types and materials of lamps on the market today, and led lamps are one of them. So the question is, do you know how to fix the broken LED lamp beads? What should I pay attention to when maintaining led lamps? Let me give you a brief introduction below.
How to fix the led lamp bead broken
First, use needle-nose pliers to crush, and use a wallpaper knife to cut off the remaining parts; second, use an electric soldering iron to melt the tin wire to connect the two ends of the base; finally, it can be used normally after turning on the power. It should be noted here that the tin wire after the power is turned on is live, so it cannot be touched directly by hand.
What to pay attention to when maintaining led lamps
1. When you use lamps in your daily life, try to avoid frequent switching as much as possible. Although the number of switching resistance of LED lamps is about 18 times that of ordinary fluorescent lamps, switching operations with too high frequency will still reduce the life of internal electronic components. , Resulting in shorter lamp life.
2. What needs to be reminded here is that except for special LED lamps, general LED lamps should not be used in humid environments as much as possible. If the electronic components are damp, the service life of the lamps will be greatly reduced.
3. Moisture-proof can be said to be the key to maintenance of lamps and lanterns. Especially in humid environments such as kitchens and bathrooms, moisture-proof lampshades must be installed to avoid rust, leakage or short circuit caused by moisture intrusion.
4. In the process of cleaning the lamp, remember not to wash it with water, but to wipe it with a wrung rag. If you accidentally get water, you should wipe it dry in time. In addition, do not wipe the surface of the lamp with a damp cloth before turning on the lamp, so as to avoid the risk of electric shock to the human body.
5. Ordinary lamps are not allowed to be used in high temperature or high humidity environments.
Editor's summary: After reading the above introduction, I believe everyone has a better understanding of how to repair the broken LED lamp beads. For more relevant information, please continue to pay attention to our website, and we will show you more exciting content in the future.
