Guangmai Technology Co., Ltd.
+86-755-23499599
Contact Us
  • Tel: +86-755-23499599

  • Fax: +86-755-23497717

  • Email: info@gmleds.com

  • Add: Guangmai Tech Park, No.96, Guangtian Rd, Yanluo, Baoan Dist, Shenzhen, China

4D Printed Shape Memory Dental Appliance Is Here, You Can Straighten It By Wearing Six Pairs

Feb 18, 2022

Introduction: For young people or students who want to straighten their teeth, more and more people will choose invisible aligners (transparent braces) for aesthetics. Dental clinics generally make dozens of sets of braces, and wear one every 1-2 weeks. Vice, gradually adjust the angle of the teeth, and finally achieve orthodontic treatment. However, because you have to wear dozens of braces, it is a bit troublesome and wasteful. So is there a better technical solution?


On February 10, 2022, the Antarctic Bear was informed that researchers from Germany, Egypt and the United Arab Emirates have developed a new type of 3D printed transparent dental appliance, which is different from the appliances currently on the market. It is made of shape memory polymer. It has a "4D" shape memory function.


The orthodontic device they developed uses Kline Europe's clear ClearX resin, 3D printed using a DLP process, that softens once placed in the user's mouth, allowing it to accommodate, grasp and reposition misaligned teeth. So far, the aligners are not only biocompatible, but have demonstrated the ability to predictably change properties over time, potentially becoming an ideal replacement for current clear braces.

152027ceazlmttebmezalf

△Researchers believe that their dental braces can greatly reduce the cost associated with the production of braces, picture from Prodways


Benefits of 4D Teeth Braces


Current appliances are made from different types of polymers, such as polyethylene materials, polyvinyl chloride, polyethylene terephthalate, polypropylene, polyester and polyurethane. The appliance works by controlling tooth movement by programming the deviation of the tooth's position from the actual tooth position. In most popular appliance systems on the market, each appliance can only move the teeth by 0.2 to 0.3 mm, or 1° to 3° of rotation each time, and each appliance is worn for approximately 14 days before being replaced with the next one. Secondary appliance. Therefore, the correction cycle of teeth is long and the cost is high.


For this appliance, researchers are focusing on two main drawbacks: the shortcomings of traditional materials and the biological considerations of tooth movement. Many methods have been introduced to biologically accelerate tooth movement. On the other hand, the introduction of new appliance materials has also attracted attention.


Shape memory polymers (SMPs) are one of the newer materials recently introduced into dentistry, especially for orthodontic applications. They offer great potential for the application of medical materials.


Four-dimensional printing (4D printing) technology is 3D printing based on shape memory materials. Clearly, 4D printed parts have the ability to change shape over time (the fourth dimension) under given environmental conditions. As shape memory polymer materials continue to evolve, new 4D printing applications in the product design industry are expected to grow. Researchers bring 4D technology to the manufacture of orthodontic appliances.

165504ynig2g7qgqylm3x7

Figure 1: Customized typo (T) 21st tooth, 4D printed aligner (A) and grey splint (S) for aligning the aligner


Research Materials, Methods and Results


First, the researchers created a custom tooth model using resin and acrylic teeth. The upper left central incisor (tooth 21) was dislocated with a total dislocation of 3 mm and was movable by embedding in pink wax in the model, while the other teeth were fixed with resin (Fig. 1).


The team then used a standard Asiga Max 3D printer and ClearX resin, which it claims is an ideal material for "modification aligners," to create six pairs of 4D-printed aligners.


These appliances are applied to models with misaligned teeth and soaked in hot water. During this process, the wax around the misaligned tooth softens, allowing it to be shaped by the appliance and then cooled to capture the data. (The specific process is more complicated, please read the original text if you are interested.)


The results showed that the shape memory appliance successfully achieved significant movement of the teeth 21 and consistent movement was also measured in the Orthodontic Measurement and Simulation System (OMSS). But the mobile alignment target of 3.00mm was not reached, only 2.06-2.82mm was achieved. Still, the results were satisfactory, with a single shape-memory appliance achieving nearly as much movement of the tooth as 10 conventional appliances could.


At present, the 4D printing appliance is still in the research stage, and it is expected to be commercialized as soon as possible.

152317by6tqi6j62jbmm3a

△ Orthodontic Measurement and Simulation System (OMSS) used to evaluate the efficacy of the team’s 4D appliance


Commercial dental 3D printing is exploding


In the past few months alone, the growing popularity of 3D printing in the dental industry has prompted a slew of manufacturers to introduce new materials and machines, each designed to facilitate high-volume aligner production as they compete in this rapidly becoming A world has opened up in a highly profitable market.


Earlier this month, Desktop Health, the medical business unit of 3D printer manufacturer Desktop Metal, released a new line of Einstein dental systems. The machines feature "HyperPrint" technology, which is said to be 50% faster than EnvisionTEC's Envision One system, launched with FDA-cleared Flexcera Smile Ultra+ resin.


Late last year, desktop LCD 3D printer maker UNIZ also started shipping NBEE resin 3D printers. Specifically designed to address the high volume production needs of dentists, this system combines speed, quality and usability for the 3D printing of aligner models, denture bases, night guards, surgical guides, crowns and bridges application.

173322om7sa7r5q54vnbvp

Companies like Prodways have now started to 3D print end-products in extremely high volumes for dental customers. In December 2021, the company revealed that it had been commissioned to supply a large customer whose machines would be used to produce up to a million aligners a year.


The researchers' findings are detailed in their paper, titled "Potential Application of 4D Technology in Fabrication of Orthodontic Aligners."

173155ohmffl01wmsbfm13