Guangmai Technology Co., Ltd.
+86-755-23499599
Contact Us
  • Tel: +86-755-23499599

  • Fax: +86-755-23497717

  • Email: info@gmleds.com

  • Add: Guangmai Tech Park, No.96, Guangtian Rd, Yanluo, Baoan Dist, Shenzhen, China

A Few Thousand Yuan Of Color Consumer-grade Light-curing 3D Printer

Jan 20, 2022

Consumer-grade light-curing 3D printers are loved by many craft enthusiasts. However, with the widening field of photocuring printing applications and the continuous flow of new ideas from users, single-color printers have been unable to meet their needs, but color inkjet 3D printers are very expensive. Is it possible to make a desktop light-curing 3D printer costing several thousand yuan to achieve color printing?

1000.webp (10)

△Sunken desktop-level light-curing 3D printer Rocket1 prints colorful models

On December 31, 2021, Antarctic Bear learned that Shenzhen Heichuang Technology Co., Ltd. (HITRY for short) has finally unlocked this new skill through in-depth excavation of the Rocket1 3D printer equipped with DCLF technology to realize color model printing. , HITRY's color printing will bring more creativity and playability. The HITRY team said: "We will provide each customer with a color kit. At present, we can achieve color printing, and in the future, we are expected to achieve full-color printing with desktop light curing."

1000.webp (11)

Advantages of color printing on the Rocket1 3D printer:


1. Make the printed model have more dazzling colors, say goodbye to the boring of a single color.


2. Low cost, using the filling liquid developed by HITRY, only 100 grams of resin can be used to achieve color printing without contaminating too much material.


3. There is no need to purchase other accessories to assist. Rocket 1 itself has color printing capability, and HITRY will provide customers with a color tool kit.


4. No additional wearing parts, no special maintenance required. It will not be blocked like inkjet printing, and it will be troublesome to maintain later.


5. A few thousand pieces can experience the color 3D printing effect that can only be achieved by millions of light curing equipment, and the color printing speed of rocket 1 is faster.

1000.webp (12)

△ A series of light-curing color 3D printing works


Another concern of this device is that the price is only a few thousand yuan. The DCLF optical machine launched by HITRY was born, and the price is only one-twentieth of the DLP.


At present, the surface projection light curing technology that relies on DLP has been monopolized by foreign countries. The expensive price seriously restricts the development of light curing 3D printing in China, and there is a risk of being stuck at any time. And the release film (FEP) used in LCD light curing is also dependent on foreign imports, not only the profits are made by foreign countries, but the release film cannot be decomposed after use, and the environmental pollution cannot be underestimated.


The Rocket 1 launched by HITRY equipped with DCLF optical engine no longer depends on the DLP optical engine, is not restricted by foreign countries, and the price is only one-twentieth of DLP. Using DCLF technology can also reduce a lot of release film and LCD screen wearing parts It is of great significance to protect the earth and achieve "carbon neutrality", greatly reducing the pollution of plastic and electronic wastes.

1000.webp (13)

△ Low-cost light-curing color 3D printing works


Previously, Antarctic Bear also reported on this Rocket1 sunken 3D printer, and its technical features mainly include:


1. Ultra-high cost performance, Rocket 1 is equipped with DCLF opto-mechanical (Digital Light Continuous Liquid Forming) technology developed by a team of 3D printing innovators with 7 years of experience, with a service life of 18,000 hours


2. The printing speed of Rocket 1 can reach up to 420mm/H, which is 20-60 times faster than that of traditional light-curing printers. It is the fastest consumer-grade sink-type 3D printer in the world. The principle is expected to break through 1000mm/H.


3. RocKet 1 has an XY resolution of 35 microns, can easily print complex holes of 0.2 mm, can pass gas, and liquid can flow normally.


4. Color printing, RocKet 1 has the color printing ability that other traditional light curing printers do not have.


6. The RocKet1 sinking type is not affected by gravity and peeling force (liquid has buoyancy), and can print highly transparent and elastic insoles, etc.


7. There is no need to frequently release the wearing parts of the liquid crystal screen.


△DCLF opto-mechanical real XY accuracy inspection video


According to the Antarctic Bear, the sunken light-curing 3D printer Rocket1 developed by Shenzhen Heichuang Technology Co., Ltd. (hereinafter referred to as HITRY) has been officially launched on Kickstarter, a well-known foreign crowdfunding website, on December 8, Beijing time. 45 days of crowdfunding, the lowest limited price is 599 US dollars, because of its high cost performance, it is sought after by users at home and abroad, and about 5 million yuan has been raised before the deadline!