The introduction of monitoring LED fill light
Surveillance LED fill light is an auxiliary light source in night vision surveillance. It is developed for various capture or license plate detection systems.
The main purpose
LED monitoring fill light is widely used in night license plate fill lighting of bayonet electronic police capture system. In addition, LED monitoring and fill light can also be used in systems such as parking lots to capture or detect license plates. Different from general LED lamps, LED fill light can be switched on day and night automatically, level, trigger, frame synchronization, video synchronization and other fill light methods.
Main Species
1. White LED fill light is often used in electronic police and road monitoring to fill traffic cameras.
2. Infrared LED fill light, also known as infrared light, is often used in residential night vision monitoring systems.
Main Feature
The use of monitoring LED fill light is more and more extensive, and the reason is mainly because monitoring LED fill light has many advantages over ordinary light source fill light. Specifically, the characteristics of monitoring LED fill light are as follows:
1. In the absence of ambient light illumination, the LED monitoring fill light can help the camera system to capture a clear image of the license plate. Can capture or video fill light according to the actual situation.
2. The monitoring LED fill light can be used fixedly, and the LED monitoring fill light also has the characteristics of superimposed use with sunlight during the day and compatible with the license plate lighting at night. It can suppress the backlight during the day and suppress the glare of the headlights at night. Make the camera have better wide dynamic.
3. The immersion light angle of the monitoring LED fill light has good unidirectionality, minimal light pollution, almost no stimulation to the human eye, and does not affect the driving safety.
4. The light spot of the monitoring LED fill light is uniform, and the luminous intensity and light angle can be adjusted. The monitoring LED fill light is easy to install and debug, and can be matched with a variety of CCD cameras.
5. The LED monitoring and fill light has low power consumption and high efficiency. The LED monitoring fill light can be always on day and night and has a long service life. The service life of the LED light source is 50,000 hours.
6. The LED monitoring and fill light has low power consumption, light weight, small size, and easy installation. It can easily form a bayonet integrated device with a camera and a protective cover.
7. The bayonet monitoring LED fill light has a dimmable light sensor switch, which can be set to turn on the fill light under different illumination levels.
